Ifilimu enamathelayo yePes Hot Melt

Umfanekiso obonisiweyo weFilimu enamathelayo yePes Hot Melt

Inkcazo emfutshane:

Udidi	IFILIMU YOKUNAMATHELA EQINISEKISA I-PES HOT MELT
Imodeli	I-HDA110-10
Igama	IFILIMU YOKUNAMATHELA EQINISEKISA I-PES HOT MELT
Ngephepha okanye Ngaphandle kwalo	Nge
UBUNZIMA/MM	0.05~0.25
UBUBALA/M/	Ububanzi obuyi-100cm, 106cm, kunye nolunye udidi bunokwenziwa ngokwe-odolo
INDAWO YOKUTSHINTSHA	93-113℃
UBUGCISA BOKUSEBENZA	umatshini wokushicilela: Ubushushu: 130-160℃ Uxinzelelo: 0.2-0.6Mpa Ixesha: 6-10s Umatshini oQokelelweyo Ubushushu: 140-180℃ Ixesha: 5-10m/min

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Yi-PES esekelwe kwiglu eshushu enyibilikayo ukuze inamathele kakuhle. Ayinabungozi kokusingqongileyo
Ifilimu yokuncamathelisa eshushu enyibilikisiweyo ene-polyester ye-thermoplastic njengomzimba oyintloko. Isetyenziselwa ikakhulu ukubopha
amalaphu ahlukeneyo, i-PVC, i-ABS, i-PET, iiplastiki ezahlukeneyo, ulusu kunye nolusu oluqhelekileyo, i-mesh
ilaphu, ifoyile ye-aluminiyam, ipleyiti ye-aluminiyam, kunye ne-veneer.

Inzuzo

1. Amandla amahle okugquma: xa kusetyenziswa kwilaphu, imveliso iya kuba nokusebenza kakuhle kokubopha.
2. Ayinabungozi kwaye ayilungelanga okusingqongileyo: Ayizukukhupha ivumba elibi kwaye ayizukuba nefuthe elibi kwimpilo yabasebenzi.
3.Ukusetyenziswa okulula: Ifilimu yokuncamathelisa eshushu iya kuba lula ukuyibopha le mpahla, kwaye ingasindisa ixesha.

Isicelo esiphambili

ukubopha amalaphu ahlukeneyo, i-PVC, i-ABS, i-PET, iiplastiki ezahlukeneyo, ulusu kunye nolusu olufakelweyo, i-mesh, i-aluminium foil, ipleyiti ye-aluminium, i-veneer.

Olunye usetyenziso

Olu hlobo lunokusetyenziselwa iintlobo ngeentlobo zamalaphu kunye nezinye izinto.