EVA HOT MELT Adhesive FILM

EVA HOT Nyibilika Ifilim encamatheleyo ekhoyo

Inkcazelo emfutshane:

NgePhepha okanye Ngaphandle	UBUNZI/MM	UBANDLA/M/njengoko ulungiselelweyo	INDAWO YOKUNyibilika	UBUGCISA OSEBENZAYO
				UMTSHINI WE-HEAT-PRESS
Ngaphandle	0.015~0.25	150cm, 152cm, kunye nobunye ububanzi bunokwenziwa ukuodolwa	55-110℃	1) Umatshini wokucofa ocwecwe Ubushushu: 150-170 ℃ Uxinzelelo: 0.4-0.6MPa Ixesha: 8-10s 2) Umatshini onzima Ubushushu: 160-180 ℃ Uxinzelelo: 0.4-0.6MPa Isantya sokuqengqeleka: 5-6 m / min

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

UMTSHINI WE-HEAT-PRESS

1) Umatshini wokucofa ocwecwe
Ubushushu: 150-170 ℃
Uxinzelelo: 0.4-0.6MPa
Ixesha: 8-10s
2) Umatshini onzima
Ubushushu: 160-180 ℃
Uxinzelelo: 0.4-0.6MPa
Isantya sokuqengqeleka: 5-6 m / min

Inkcazo engundoqo

I-L043 ilungele i-lamination ye-microfiber kunye ne-EVA chips, amalaphu, iphepha, njl.

Inzuzo

I-1.i-lamination enamandla: xa isetyenziswe kwi-textile, imveliso iya kuba nokusebenza kakuhle kokubambisana.
2.Non-ityhefu kunye nokusingqongileyo-friendly: Ayiyi kukhupha ivumba elibi kwaye ayiyi kuba neempembelelo ezimbi kwimpilo yabasebenzi.
I-3.Isicelo esilula: Ifilimu ye-adhesive hotmelt iya kuba lula ukubopha izinto eziphathekayo, kwaye inokugcina ixesha.

I-4.Iyimveliso enokumelana nokushisa okuphezulu, uphawu olukhethekileyo.

Isicelo esiphambili