Iprofayili ye-H&H-8.11

Inkcazelo emfutshane:

NgePhepha okanye Ngaphandle	UBUNZI/MM	WIDTH/M/njengoko kulungiselelwe	INDAWO YOKUNyibilika	UBUGCISA OSEBENZAYO
				UMTSHINI WE-HEAT-PRESS
Nge	0.05~0,25	100cm, 106cm, kunye nobunye ububanzi bunokwenziwa ukuodolwa	60-115℃	Ukucofa phantsi Ubushushu: 120-150 Uxinzelelo: 0.2-0.6Mpa Ixesha: 6-10s Umatshini oyinkimbinkimbi Ubushushu: 130-170 ℃ Isantya se-roller: 5-10m / min

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

UMTSHINI WE-HEAT-PRESS

Ukucofa phantsi
Ubushushu: 120-150
Uxinzelelo: 0.2-0.6Mpa
Ixesha: 6-10s
Umatshini oyinkimbinkimbi
Ubushushu: 130-170 ℃
Isantya se-roller: 5-10m / min

Inkcazo engundoqo

Yimveliso ngaphandle kokongeza i-agent emhlophe ye-fluorescent. Isetyenziswa kakhulu ekudibaneni kwamalaphu elaphu ahlukeneyo, i-PVC, i-ABS, i-PET, iiplastiki ezahlukeneyo, ufele kunye neentlobo ngeentlobo zesikhumba sokwenziwa, umnatha, ifoyile ye-aluminiyam, ipleyiti ye-aluminiyam, i-veneer.

Inzuzo

I-1.i-lamination enamandla: xa isetyenziswe kwi-textile, imveliso iya kuba nokusebenza kakuhle kokubambisana.
2.Non-ityhefu kunye nokusingqongileyo-friendly: Ayiyi kukhupha ivumba elibi kwaye ayiyi kuba neempembelelo ezimbi kwimpilo yabasebenzi.
I-3.Isicelo esilula: Ifilimu ye-adhesive hotmelt iya kuba lula ukubopha izinto eziphathekayo, kwaye inokugcina ixesha.

Isicelo esiphambili

Ukudibanisa amalaphu elaphu ahlukeneyo, i-PVC, i-ABS, i-PET, iiplastiki ezahlukeneyo, ufele kunye neentlobo ezahlukeneyo zesikhumba sokwenziwa, umnatha, ifoyile ye-aluminiyam, ipleyiti ye-aluminium, i-veneer.

Esinye isicelo